Manthorpe Slate hearths for wood burners 2nd December 2024
We have made10,000’s of slate hearths for wood burners over the last 20 years. These have been of all shapes and sizes. Recently a customer came to us wanting a hearth a little out of the ordinary. The brief was to have something unique which you wouldn’t find in your friend’s house. Here at Manthorpe Slate, our slate hearths for wood burners were able to fit this brief, as we explain below!
The shape of the hearth was a complex one, where the ends are designed to wrap around the corners of the brick fireplace and have an asymmetrical design to facilitate the storage of a log basket on the right hand side of the hearth . This slate hearth also needed to be raised up from the floor to enable the new floor, when eventually fitted, to run seamlessly underneath the edge of the hearth. Because of the complex shape of the hearth it was decided to make the plinth as a solid piece rather than strips of slate which are normally set into position and then back filled with a screed . It was also decided to make the hearth in two pieces but as a shallow T shape, with a join line between the two pieces to match the grouting lines of the slate tiles behind the wood burning stove. The tiles where also supplied by Manthorpe Slate. The slate we used was a light grey/green south American slate in a riven finish.


If you like the idea of adding a touch of unique elegance to your home, visit our bespoke hearths page of contact us at Manthorpe Slate.
